- NAS (Network Attached Storage)
Sol NAS  
Sol NAS OS

  • NAS E4 - 4 bay SATA II , Xeon 3200/3000

  • NAS E8 - 8 bay SATA II , Xeon 3200/3000

  • NAS E16 - 16 bay SATA II , Xeon 3200/3000

  • NAS E24 - 24 bay SATA II , Xeon 3200/3000

  • NAS X8 - 8 bay SAS , Xeon 5000

  • NAS X16 - 16 bay SAS , Xeon 5000

  • NAS X24 - 24 bay SAS , Xeon 5000

  • NAS G - NAS Gateway (for external storage)

  • NAS C - Clustered NAS Gateway

Windows Storage Server -- WSS2008

 

Sol NAS
Sol NAS E4

 

Hardware Specification

  • Industrial standard 19” 1U platform
  • Intel Dual Core Pentium 2.2Ghz (up to 3.6Ghz) or optional Quad Core Xeon
  • 1GB DDR2 ECC main memory (up to 8GB)
  • Dual Gigabit Ethernet, Support Failover and Load balance (7-modes)
  • 10Gb Ethernet easily upgradeable for high performance NAS share and iSCSI target
  • Embedded 4-port SATA II 3G RAID controller
  • Four Hot swap SATA II HDD, in RAID 0, 1, 5, 6, 0+1

Protocol / Services

  • Client File System : SMB, CIFS, NFS, AFP, FTP
  • Network Transport Protocol : TCP/IP, NTP, DHCP, HTTP/HTTPS, SNMP, AppleTalk
  • Network Services : WINS, DHCP, NIS, NTP, SNMP
  • PDC, ADS, and Windows 2008 ADDS supported by User info synchronization with interval of resync
  • iSCSI Target with free
  

 

Feature Highlights

  • Non-windows NAS OS provides Excellent performance for both NFS  & CIFS file transfer
  • Robust XFS Journaling File System, The best File-sharing for cross OS platform clients
  • NAS OS in DOM (disk on module), more reliable
  • Teaming over 2 x Gigabit NICs , Support Load balance and Failover (7-modes supported)
  • Hardware RAID 5/6 support up to 4 x SATA II hot swappable HDD
  • Support Online Volume Expansion
  • Schedulable Volume Snapshots, and point-in-time Snapshot-On-Demand, for both NAS and iSCSI volumes
  • Embedded Replicator can replicate folders to itself, or another Sol NAS in the same LAN, or remote location over internet/VPN/WAN. Support Scheduling, versioning (multiple copies with time-stamp), and Data Consistency Provisioning
  • NAS-2-NAS folder Local/Remote Replication included (iSCSI target function included) which is, one-to-one, one-to-many, many-to-one, many-to-many, in Block level / File basis
  • Auto email notification for pre-defined events
  • Support External Tape Drive/Autoloader/Library
  • Optional SFM (Server Failover Mirroring) with Volume-Failover
  • Optional 10Gb Ethernet with Teaming
     
 
Sol NAS E8

Hardware Specification

  • Industrial standard 19” 2U platform
  • Intel Dual Core Pentium 2.2Ghz (up to 3.6Ghz) or optional Quad Core Xeon
  • 1GB DDR2 ECC main memory (up to 8GB)
  • Dual Gigabit Ethernet, Support Failover and Load balance (7-modes)
  • 10Gb Ethernet easily upgradeable for high performance NAS share and iSCSI target
  • Embedded 8-port SATA II 3G RAID controller
  • Eitht Hot swap SATA II HDD, in RAID 0, 1, 5, 6, 0+1. Optional SAS RAID HDD

Protocol / Services

  • Client File System : SMB, CIFS, NFS, AFP, FTP
  • Network Transport Protocol : TCP/IP, NTP, DHCP, HTTP/HTTPS, SNMP, AppleTalk
  • Network Services : WINS, DHCP, NIS, NTP, SNMP
  • PDC, ADS, and Windows 2008 ADDS supported by User info synchronization with interval of resync
  • iSCSI Target with free

 

  

 

Feature Highlights

  • Non-windows NAS OS provides Excellent performance for both NFS  & CIFS file transfer
  • Robust XFS Journaling File System, The best File-sharing for cross OS platform clients
  • NAS OS in DOM (disk on module), more reliable
  • Teaming over 2 x Gigabit NICs , Support Load balance and Failover (7-modes supported)
  • Hardware RAID 5/6 support up to 8 x SATA II hot swappable HDD (or optional SAS RAID)
  • Support Online Volume Expansion
  • Schedulable Volume Snapshots, and point-in-time Snapshot-On-Demand, for both NAS and iSCSI volumes
  • Embedded Replicator can replicate folders to itself, or another Sol NAS in the same LAN, or remote location over internet/VPN/WAN. Support Scheduling, versioning (multiple copies with time-stamp), and Data Consistency Provisioning
  • NAS-2-NAS folder Local/Remote Replication included (iSCSI target function included) which is, one-to-one, one-to-many, many-to-one, many-to-many, in Block level / File basis
  • Auto email notification for pre-defined events
  • Support External Tape Drive/Autoloader/Library
  • Optional SFM (Server Failover Mirroring) with Volume-Failover
  • Optional 10Gb Ethernet with Teaming
     
 
Sol NAS E16

Hardware Specification

  • Industrial standard 19” 3U platform
  • Intel Dual Core Pentium 2.2Ghz (up to 3.6Ghz) or optional Quad Core Xeon
  • 1GB DDR2 ECC main memory (up to 8GB)
  • Dual Gigabit Ethernet, Support Failover and Load balance (7-modes)
  • 10Gb Ethernet easily upgradeable for high performance NAS share and iSCSI target
  • Embedded 16-port SATA II 3G RAID controller
  • Sixteen Hot swap SATA II HDD, in RAID 0, 1, 5, 6, 0+1. Optional SAS RAID HDD
  • NAS Gateway capable for FC, SAS, and SCSI storage expansion

Protocol / Services

  • Client File System : SMB, CIFS, NFS, AFP, FTP
  • Network Transport Protocol : TCP/IP, NTP, DHCP, HTTP/HTTPS, SNMP, AppleTalk
  • Network Services : WINS, DHCP, NIS, NTP, SNMP
  • PDC, ADS, and Windows 2008 ADDS supported by User info synchronization with interval of resync
  • iSCSI Target with free

 

  

 

Feature Highlights

  • Non-windows NAS OS provides Excellent performance for both NFS  & CIFS file transfer
  • Robust XFS Journaling File System, The best File-sharing for cross OS platform clients
  • NAS OS in DOM (disk on module), more reliable
  • Teaming over 2 x Gigabit NICs , Support Load balance and Failover (7-modes supported)
  • Hardware RAID 5/6 support up to 16 x SATA II hot swappable HDD (or optional SAS RAID)
  • Support Online Volume Expansion
  • Schedulable Volume Snapshots, and point-in-time Snapshot-On-Demand, for both NAS and iSCSI volumes
  • Embedded Replicator can replicate folders to itself, or another Sol NAS in the same LAN, or remote location over internet/VPN/WAN. Support Scheduling, versioning (multiple copies with time-stamp), and Data Consistency Provisioning
  • NAS-2-NAS folder Local/Remote Replication included (iSCSI target function included) which is, one-to-one, one-to-many, many-to-one, many-to-many, in Block level / File basis
  • Auto email notification for pre-defined events
  • Support External Tape Drive/Autoloader/Library
  • Optional SFM (Server Failover Mirroring) with Volume-Failover
  • Optional 10Gb Ethernet with Teaming
     
 
Sol NAS G

Sol NAS C

Hardware Specification

  • Industrial standard 19” 2U platform
  • Intel Xeon 3.0Ghz (up to 3.6Ghz)
  • 2GB DDR2 ECC main memory (up to 32GB)
  • Dual Gigabit Ethernet, Support Failover and Load balance
  • Expansion slots for more Network Interface and storage HBA ports, supporting Ultra320 SCSI and 4Gb Fibre Channel, and 10Gb iSCSI/Ethernet
  • Two Mirrored SCSI HDD for NAS OS

Protocol / Services

  • Client File System : SMB, CIFS, NFS, AFP, FTP
  • Network Transport Protocol : TCP/IP, NTP, DHCP, HTTP/HTTPS, SNMP, AppleTalk
  • Network Services : WINS, DHCP, NIS, NTP, SNMP
  • PDC, ADS, and Windows 2008 ADDS supported by User info synchronization with interval of resync
  • iSCSI Target with free
  
Sol NAS G is the NAS Gateway for huge external storage with Fibre channel, SCSI, and SAS. 
Sol NAS C is the clustered NAS G.  Two NAS C for NAS clustering.

Feature Highlights

  • Non-windows NAS OS provides Excellent performance for both NFS  & CIFS file transfer
  • Robust XFS Journaling File System, The best File-sharing for cross OS platform clients
  • NAS OS in mirrored SCSI HDD, more reliable
  • Teaming over 2 x Gigabit Ethernet, Support Load balance and Failover
  • External RAID storage capable for huge capacity
  • Schedulable Volume Snapshots, and point-in-time Snapshot-On-Demand
  • Embedded Replicator can replicate folders to itself, or another Sol NAS in the same LAN, or remote location over internet/VPN/WAN. Support Scheduling, versioning (multiple copies with time-stamp), and Data Consistency Provisioning
  • NAS-2-NAS folder Local/Remote Replication included (iSCSI target function included) which is, one-to-one, one-to-many, many-to-one, many-to-many, in Block level / File basis
  • Auto email notification for pre-defined events
  • Support External Tape Drive/Autoloader/Library
  • Supported storage HBA: Ultra320 SCSI, 4Gb Fibre channel, 3Gb SAS, 10Gb iSCSI/Ethernet
       
Sol NAS W4

Hardware Specification

  • Industrial standard 19” 1U platform
  • Intel Dual Core Pentium 2.2Ghz (up to 3.6Ghz) or optional Quad Core Xeon
  • 1GB DDR2 ECC main memory (up to 8GB)
  • Dual Gigabit Ethernet, Support Failover and Load balance (7-modes)
  • 10Gb Ethernet easily upgradeable for high performance NAS share and iSCSI target
  • Embedded 4-port SATA II 3.0G RAID controller
  • 4 x Hot swap SATA II HDD, in RAID 0, 1, 5
    Optional RAID 6
  • 2 x USB 2.0 port and UPS supported

Protocol / Services

  • Network Client Support : Microsoft Windows, Linux, AIX, HP-UX, Solaris, Novell Netware, Mac OS
  • Network Transport Protocol : TCP/IP, IPX, SNMP, AppleTalk
  • Directory Management : ADS (Windows), NIS (Unix), and NDS (Novell)
  • Fire Transfer Protocol : Windows CIFS, Unix NFS, HTTP
  • Other Services : Single Instance Storage (SIS), New DFS, File Server Resource Management (FSRM), Windows SharePoint Services, Print Management Console
    

Windows Storage Server 2008

Feature Highlights

  • System Management : Support Unicode, Microsoft Management Console, NT Domain Authentication, CLI
  • Quota Management : Volume/Folder Quota, File Screening, Storage Reporting, NameSpace Capability
  • Snapshot / Volume Shadow Copy Services (VSS) : Volume or Folder based, manually or scheduled, Restoration
  • Path Failover : MPIO, load-balance and failover
  • Seamless Integration for
    - Exchange 2003 Services
    - Distributed File System (DFS)
    - Active Directory Service
    - IP SAN Gateway
    - CIFS (SMB), NFS, AppleTalk, Netware, FTP, HTTP

Optional Parts

  • iSCSI Target : optional iSCSI Target feature shares the storage from CD/DVD/HD/Tape/RAID to unlimited client seats, in block base with no storage capacity limitation.  Extra Snapshot Creation, Restoration, and Convert-to-Full features are provided to work with Dynamic Volume Snapshot, Virtual Volume, and Incremental Backup
     
 
Sol NAS W8

Hardware Specification

  • Industrial standard 19” 2U platform
  • Intel Dual Core Pentium 2.2Ghz (up to 3.6Ghz) or optional Quad Core Xeon
  • 1GB DDR2 ECC main memory (up to 8GB)
  • Dual Gigabit Ethernet, Support Failover and Load balance (7-modes)
  • 10Gb Ethernet easily upgradeable for high performance NAS share and iSCSI target
  • 8 x Hot swap SATA II HDD, in RAID 0, 1, 5
    Optional RAID 6
    Optional SAS HDD bay
  • 2 x USB 2.0 port and UPS supported

Protocol / Services

  • Network Client Support : Microsoft Windows, Linux, AIX, HP-UX, Solaris, Novell Netware, Mac OS
  • Network Transport Protocol : TCP/IP, IPX, SNMP, AppleTalk
  • Directory Management : ADS (Windows), NIS (Unix), and NDS (Novell)
  • Fire Transfer Protocol : Windows CIFS, Unix NFS, HTTP
  • Other Services : Single Instance Storage (SIS), New DFS, File Server Resource Management (FSRM), Windows SharePoint Services, Print Management Console
    

Windows Storage Server 2008

Feature Highlights

  • System Management : Support Unicode, Microsoft Management Console, NT Domain Authentication, CLI
  • Quota Management : Volume/Folder Quota, File Screening, Storage Reporting, NameSpace Capability
  • Snapshot / Volume Shadow Copy Services (VSS) : Volume or Folder based, manually or scheduled, Restoration
  • Path Failover : MPIO, load-balance and failover
  • Seamless Integration for
    - Exchange 2003 Services
    - Distributed File System (DFS)
    - Active Directory Service
    - IP SAN Gateway
    - CIFS (SMB), NFS, AppleTalk, Netware, FTP, HTTP

Optional Parts

  • iSCSI Target : optional iSCSI Target feature shares the storage from CD/DVD/HD/Tape/RAID to unlimited client seats, in block base with no storage capacity limitation.  Extra Snapshot Creation, Restoration, and Convert-to-Full features are provided to work with Dynamic Volume Snapshot, Virtual Volume, and Incremental Backup
  • Network Adapter : single or dual port NIC
  • Storage Adapter
    - 4Gb Fibre Channel HBA
    - U320 SCSI HBA
    - SAS HBA / RAID card
     
 
Sol NAS W16

Hardware Specification

  • Industrial standard 19” 3U platform
  • Intel Dual Core Pentium 2.2Ghz (up to 3.6Ghz) or optional Quad Core Xeon
  • 1GB DDR2 ECC main memory (up to 8GB)
  • Dual Gigabit Ethernet, Support Failover and Load balance (7-modes)
  • 10Gb Ethernet easily upgradeable for high performance NAS share and iSCSI target
  • Embedded 16-port SATA II 3.0G RAID controller
  • 16 x Hot swap SATA II HDD, in RAID 0, 1, 5
    Optional RAID 6
    Optional Ultra320 SCSI bay
  • 2 x USB 2.0 port and UPS supported

Protocol / Services

  • Network Client Support : Microsoft Windows, Linux, AIX, HP-UX, Solaris, Novell Netware, Mac OS
  • Network Transport Protocol : TCP/IP, IPX, SNMP, AppleTalk
  • Directory Management : ADS (Windows), NIS (Unix), and NDS (Novell)
  • Fire Transfer Protocol : Windows CIFS, Unix NFS, HTTP
  • Other Services : Single Instance Storage (SIS), New DFS, File Server Resource Management (FSRM), Windows SharePoint Services, Print Management Console
    

 

Windows Storage Server 2008

Feature Highlights

  • System Management : Support Unicode, Microsoft Management Console, NT Domain Authentication, CLI
  • Quota Management : Volume/Folder Quota, File Screening, Storage Reporting, NameSpace Capability
  • Snapshot / Volume Shadow Copy Services (VSS) : Volume or Folder based, manually or scheduled, Restoration
  • Path Failover : MPIO, load-balance and failover
  • Seamless Integration for
    - Exchange 2003 Services
    - Distributed File System (DFS)
    - Active Directory Service
    - IP SAN Gateway
    - CIFS (SMB), NFS, AppleTalk, Netware, FTP, HTTP

Optional Parts

  • iSCSI Target : optional iSCSI Target feature shares the storage from CD/DVD/HD/Tape/RAID to unlimited client seats, in block base with no storage capacity limitation.  Extra Snapshot Creation, Restoration, and Convert-to-Full features are provided to work with Dynamic Volume Snapshot, Virtual Volume, and Incremental Backup
  • Network Adapter : single or dual port NIC
  • Storage Adapter
    - 4Gb Fibre Channel HBA
    - U320 SCSI HBA
    - SAS HBA / RAID card
       
 

　 

Copyright © 2010 Solkenix System Inc., all rights reserved