External Storage Matrix

 

Logo Type Model # Host -to- Disk channel HDD bay

---------------

Fibre Channel

-----------------------------------------------------  
Virtual Tape Lib. FastStream VT5300 2 x 4Gb FC-to-SCSI U320 Appliance
RAID FastStream SC5700 2 x 4Gb FC-to-FC 4Gb x 2 Appliance
RAID FastStream SC5300 2 x 4Gb FC-to-SCSI U320 Appliance
RAID FS4500 2 x 2Gb FC-to-SATA II 12-bay SATA
RAID Turbo 8 x 2Gb FC-to-FC/SATA II 16-bay FC/SATA
RAID SS16-F2 2 x 2Gb FC-to-SCSI 16-bay U320 SCSI
RAID SA16i-F4 2 x 4Gb FC-to-SATA II 16-bay SATA II
   RAID SAS12-F4    2 x 4Gb FC-to-SAS/SATA II 12-bay SAS/SATA
RAID SA12i-F4 2 x 4Gb FC-to-SATA II 12-bay SATA II
   RAID SA12e-F4 2 x 4Gb FC-to-SATA II 12-bay SATA II
   RAID SA8e-F4 2 x 4Gb FC-to-SATA II 8-bay SATA II
         
         

---------------

iSCSI

-----------------------------------------------------  
    RAID iSA16 2 x iSCSI-to-SATA II 16-bay SATA II
         

---------------

SCSI

-----------------------------------------------------  
RAID SS16 2 x U320 SCSI-to-SCSI 16-bay U320 SCSI
RAID SS12 2 x U320 SCSI-to-SCSI 12-bay U320 SCSI
RAID SA16 2 x U320 SCSI-to-SATA II 16-bay SATA II
RAID SA16i 2 x U320 SCSI-to-SATA II 16-bay SATA II
RAID SA12i 2 x U320 SCSI-to-SATA II 12-bay SATA II
   RAID SA12e 2 x U320 SCSI-to-SATA II 12-bay SATA II
   RAID SA8e 2 x U320 SCSI-to-SATA II 8-bay SATA II
RAID SA8-v 2 x U320 SCSI-to-SATA II 8-bay SATA II
RAID i8 2 x U320 SCSI-to-SATA II 8-bay IDE
RAID SA5 2 x U320 SCSI-to-SATA II 5-bay SATA II
         

---------------

iSCSI + SCSI

-----------------------------------------------------  
RAID SA16-is iSCSI + SCSI -to-SATA II 16-bay SATA II
RAID SA8-is iSCSI + SCSI -to-SATA II 8-bay SATA II
RAID i8-is iSCSI + SCSI -to-IDE 8-bay IDE
         

---------------

USB / FireWire

-----------------------------------------------------  
   RAID SA8e-FW USB 2.0/1394b-to-SATA II 8-bay SATA II
RAID SA5-FW USB 2.0/1394b-to-SATA II 5-bay SATA II

 


 

FastStream-VT5300

 

datasheet

 

  • Configurable for 1 or 2 Virtual Tape Libraries

  • Up to 30 Virtual Tape drives and 256 Virtual Tapes per Library

  • RAID Levels 0, 1, 5, 10

  • Dual 4Gb Fibre Channel Host Interfaces

  • Dual Ultra320 SCSI Device Interfaces

  • One-click installation to simplify configuration and management

  • Global Hot Spares allow faulted drives to automatically rebuild

  • SpeedWrite Feature boosts write performance by efficiently managing writes between the server and virtual tape drives

  • HDD is significantly more reliable, with no cleaning or streaming problems

  • ExpressNAV™ browser-based management console for remote configuration, management, and diagnostic capabilities

  • On-the-fly tape expansion allows the user to increase the amount of virtual tapes available without having to purchase additional virtual tape hardware

  • OS independent enables easy integration into current infrastructure

  • Phone home error notification

  • RoHS Compliant

 


 

FastStream-SC5700

datasheet

  • Add instant data protection - DVRAID and RAID Levels 0, 1, 5, 10

  • Add SAN Functionality to existing SCSI Storage

  • Dual 4Gb Fibre Channel Host Interfaces

  • Dual 4Gb Fibre Channel Device Interfaces

  • Drive Partitioning allows you to create smaller  partitions on large RAID drives.

  • Global Hot Spares allow faulted drives to automatically rebuild

  • Drive Initialization and Verification feature identifies drives with soft errors or performance issues

  • Increase system performance to match application needs

  • ExpressNAV™ integrated management console for remote configuration, management and
    diagnostic capabilities

  • Storage pooling improves utilization of existing storage while reducing managerial and administrative overhead

  • Add storage as needed with minimal or no downtime

  • OS independent enables easy integration into current infrastructure

  • Phone home error notification

  • RoHS Compliant

 

 


 

FastStream-SC5300

datasheet

  • Add instant data protection - DVRAID and RAID Levels 0, 1, 5, 10

  • Add SAN Functionality to existing SCSI Storage

  • Dual 4Gb Fibre Channel Host Interfaces

  • Dual Ultra320 SCSI Device Interfaces

  • Drive Partitioning allows you to create smaller  partitions on large RAID drives.

  • Global Hot Spares allow faulted drives to automatically rebuild

  • Drive Initialization and Verification feature identifies drives with soft errors or performance issues

  • Increase system performance to match application needs

  • ExpressNAV™ integrated management console for remote configuration, management and
    diagnostic capabilities

  • Storage pooling improves utilization of existing storage while reducing managerial and administrative overhead

  • Add storage as needed with minimal or no downtime

  • OS independent enables easy integration into current infrastructure

  • Phone home error notification

  • Supports SCSI and Fibre Channel (future) storage devices

  • (Future) support for SAS/SATA and Fibre Channel

  • RoHS Compliant

 

 


原廠首頁

FS-4500

FS4500

datasheet

  • RAID level 0, 1, 3, 5, 10, 30, 50, JBOD using Multiple XOR techniques

  • Host independent, no driver required to the host bus

  • Host interface: Dual Loop 2Gb Fibre Channel, bandwidth up to 400MB/sec

  • 12 x SATA 3.0 Gb HDD bay, with dual port access and failover to each HDD

  • Dual redundant power supply, hot swap capable

  • 256MB ECC cache, up to 1GB to each controller

  • Dynamic online RAID expansion, partitioning, and reconfiguration

  • 10/100 Ethernet port, and RS232 port for monitoring and configuration

  • up to 48,000 IOPS and 385MByte/sec (sustained reads)

  • Dual Active redundant failover/failback RAID controller

  • Battery protected mirrored write cache

  • SAN ready, Full Fabric support

 


JMR Turbo

datasheet

  • One to three controllers can be connected in a cluster

  • Eight Fibre Channel ports per controller, which are configurable for either disk or host connectivity

  • Each controller supports up to 840 drives

  • RAID system can be tuned for access-intensive or capacity-intensive environment (or in between)

  • Multi-processor, multi-bus technology

  • RAID Levels 0, 1, 10, 100, 3, 30, 5, 50

  • Active-Active-Active configurations Triple performance

  • Support FC, SATA, and also SAS hard drives

 


SOL SS16-F2

datasheet

 

 

  • Intel 80321 600 Mhz 64-bit RISC CPU with PCI-X Internal Bus and XOR Engine

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 0+1, 30, 50, NRAID

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Embedded environmental sensors for intelligent temperature/Voltage/FAN status self-diagnostics and analysis

  • Host : 2 x 2Gb Fibre Channel,200MB/sec per channel

  • HDD : 16 x Ultra320 SCSI (320MB/s)  HDD bay, daisy chainable for another two 16-bay JBOD for Capacity Expansion

  • RAID disk Roaming between RAID subsystems

  • Dynamic Volume Expansion, Array Roaming, HD Traveling supported

  • Online Multiple RAID group Expansion

  • Online Multiple Manual or Event-triggered disk cloning

  • Online Multiple Manual or periodic disk scrubbing

  • Smart LCD display with buttons to configure and monitoring

  • 300W x 3 Hot Swappable / Redundant Power Supply

 


SOL SA16i-F4

datasheet

 

  • Intel XScale 321 400 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Fully modularized design for highest reliability and easy maintenance

  • Remote GUI Management via web browser

  • Host : 2 x 4Gb Fibre Channel,400MB/sec per channel

  • HDD : 16 x SATA II (3Gbs)  HDD interface

  • RAID disk Roaming between RAID subsystems

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

  • Smart LCD display with buttons to configure and monitoring

 


SOL SA12i-F4

datasheet

 

  • Intel XScale 321 400 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Fully modularized design for highest reliability and easy maintenance

  • Remote GUI Management via web browser

  • Host : 2 x 4Gb Fibre Channel,400MB/sec per channel

  • HDD : 12 x SATA II (3Gbs)  HDD interface

  • RAID disk Roaming between RAID subsystems

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

  • Smart LCD display with buttons to configure and monitoring

 


SOL SAS12-F4



datasheet

 

  • 64-bit RISC CPU (to be released)

  • Standard 128MB ECC cache for each controller, Up to 2 x 2GB with resizing

  • Hot Swappable / Redundant Dual Controllers or Single Controller

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Active-Active Logical Unit Access and Software Cache Mirroring

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Fully modularized design for highest reliability and easy maintenance

  • Remote GUI Management via web browser

  • Host : Up to 4 x 4Gb Fibre Channel,32 Concurrent Hosts Supported

  • HDD : 12 x Dual Port SAS (3Gbs) or SATA II (3Gbs)  HDD interface

  • Support Online Daisy Chaining JBOD, Storage Group and Volume Expansion

  • Up to 256 LUNs is Supported

  • Web Based Management Interface, SNMP, Email Alert are supported

  • SMI-S compliant and Supports VSS and VDS features

  • Snapshot in the box
           

 


SOL iSA16

datasheet

 

  • Intel XScale 331 500 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 2GB ECC supported

  • RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

  • Host : 2 x 1Gb Ethernet/iSCSI, 1Gb/sec per Channel

  • HDD : 16 x SATA II (3Gbs)  HDD Interface

  • RAID Disk Roaming between RAID Subsystems

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Remote GUI Management via web browser

  • LCD panel with buttons and CLI also provided for configuration and monitoring

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • 250W x 3 Hot Swappable / Redundant Power Supply

  • Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

 


SOL SS16

datasheet

 

 

  • Intel 80321 600 Mhz 64-bit RISC CPU with PCI-X Internal Bus and XOR Engine

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 0+1, 30, 50, NRAID

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Embedded environmental sensors for intelligent temperature/Voltage/FAN status self-diagnostics and analysis

  • Host : 2 x Ultra320 SCSI,320MB/sec per channel

  • HDD : 16 x Ultra320 SCSI (320MB/s)  HDD bay, daisy chainable for another two 16-bay JBOD for Capacity Expansion

  • RAID disk Roaming between RAID subsystems

  • Dynamic Volume Expansion, Array Roaming, HD Traveling supported

  • Online Multiple RAID group Expansion

  • Online Multiple Manual or Event-triggered disk cloning

  • Online Multiple Manual or periodic disk scrubbing

  • Smart LCD display with buttons to configure and monitoring

  • 300W x 3 Hot Swappable / Redundant Power Supply

 


SS12

datasheet

 

  • Intel 80321 600 Mhz 64-bit RISC CPU with PCI-X Internal Bus and XOR Engine

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 0+1, 30, 50, NRAID

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Embedded environmental sensors for intelligent temperature/Voltage/FAN status self-diagnostics and analysis

  • Host : 2 x Ultra320 SCSI,320MB/sec per channel

  • HDD : 12 x Ultra320 SCSI (320MB/s)  HDD bay, daisy chainable for another two 12-bay JBOD for Capacity Expansion

  • RAID disk Roaming between RAID subsystems

  • Dynamic Volume Expansion, Array Roaming, HD Traveling supported

  • Online Multiple RAID group Expansion

  • Online Multiple Manual or Event-triggered disk cloning

  • Online Multiple Manual or periodic disk scrubbing

  • Smart LCD display with buttons to configure and monitoring

  • 300W x 2 Hot Swappable / Redundant Power Supply

 


SOL SA16

datasheet

 

  • Intel XScale 331 500 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 2GB ECC supported

  • RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

  • Host : 2 x Ultra320 SCSI, 320MB/sec per Channel

  • HDD : 16 x SATA II (3Gbs)  HDD Interface

  • RAID Disk Roaming between RAID Subsystems

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Remote GUI Management via web browser

  • LCD panel with buttons and CLI also provided for configuration and monitoring

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • 250W x 3 Hot Swappable / Redundant Power Supply

  • Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

 


SOL SA16i

datasheet

 

 

  • Intel XScale 321 400 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Fully modularized design for highest reliability and easy maintenance

  • Remote GUI Management via web browser

  • Host : 2 x U320 SCSI,320MB/sec per channel

  • HDD : 16 x SATA II (3Gbs)  HDD interface

  • RAID disk Roaming between RAID subsystems

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

  • Smart LCD display with buttons to configure and monitoring

 


SOL SA12i

datasheet

 

 

  • Intel XScale 321 400 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Fully modularized design for highest reliability and easy maintenance

  • Remote GUI Management via web browser

  • Host : 2 x Ultra320 SCSI,320MB/sec per channel

  • HDD : 12 x SATA II (3Gbs)  HDD interface

  • RAID disk Roaming between RAID subsystems

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

  • Smart LCD display with buttons to configure and monitoring

 


SOL SA8-v

datasheet

 

  • Intel XScale 331 500 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 2GB ECC supported

  • RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

  • Host : 2 x Ultra320 SCSI, 320MB/sec per Channel

  • HDD : 8 x SATA II (3Gbs)  HDD Interface

  • RAID Disk Roaming between RAID Subsystems

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Remote GUI Management via web browser

  • LCD panel with buttons and CLI also provided for configuration and monitoring

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • 300W x 2 Hot Swappable / Redundant Power Supply

 


SOL i8

datasheet

 

 

  • Intel XScale 321 400 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM , Up to 1GB ECC supported

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Fully modularized design for highest reliability and easy maintenance

  • Remote GUI Management via web browser

  • Host : 2 x Ultra160 SCSI,160MB/sec per channel

  • HDD : 8 x EIDE HDD interface

  • RAID disk Roaming between RAID subsystems

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

  • Smart LCD display with buttons to configure and monitoring

 


SOL SA5   (U320 SCSI)

SOL SA5-FW (Combo)

datasheet

  • Intel 80219 400 Mhz 64-bit RISC CPU

  • Standard 128MB cache RAM

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Host : 1 x Ultra320 SCSI,320MB/sec per channel (SA5-U320)
    Host : 1 x USB 2.0 + 1 x 1394b FireWire (SA5-FW)

  • HDD : 5 x SATA II (3Gb/s) HDD interface

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Smart LCD display with buttons to configure and monitoring

  • Web Browser Management Utility Embedded

SA5-U320 SA5-FW
Ultra 320 SCSI USB 2.0 + 1394b
320 MByte/sec 60 MByte/sec
480 Mb/sec
100 MByte/sec
800 Mb/sec

 


SOL SA16-is

datasheet

 

  • 2 x CPU !! , Intel 64-bit RISC CPU
    - RAID : Intel XScale 331 500 Mhz
    - iSCSI 550 : 80321 600Mhz <- High Performance

  • Standard 128MB cache RAM , Up to 2GB ECC supported
    - Secondary Cache 128MB dedicated for iSCSI and TOE processing

  • RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

  • Host : Two different host channels working simultaneously
    - 1 x 1Gb iSCSI , 1Gb/s
    - 1 x Ultra320 SCSI,320MB/sec

  • iSCSI device Expansion - Daisy Chainable HDD, RAID, Tape Library, Jukebox of DVD/CD, ... then become iSCSI devices for SAN users

  • HDD : 16 x SATA II (3Gbs)  HDD Interface

  • RAID Disk Roaming between RAID Subsystems

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Remote GUI Management via web browser

  • LCD panel with buttons and CLI also provided for configuration and monitoring

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • 250W x 3 Hot Swappable / Redundant Power Supply

  • Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

 


SOL SA8-is

datasheet

 

  • 2 x CPU !! , Intel 64-bit RISC CPU
    - RAID : Intel XScale 331 500 Mhz
    - iSCSI 550 : 80321 600Mhz <- High Performance

  • Standard 128MB cache RAM , Up to 2GB ECC supported
    - Secondary Cache 128MB dedicated for iSCSI and TOE processing

  • RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

  • Host : Two different host channels working simultaneously
    - 1 x 1Gb iSCSI , 1Gb/s
    - 1 x Ultra320 SCSI,320MB/sec

  • iSCSI device Expansion - Daisy Chainable HDD, RAID, Tape Library, Jukebox of DVD/CD, ... then become iSCSI devices for SAN users

  • HDD : 8 x SATA II (3Gbs)  HDD Interface

  • RAID Disk Roaming between RAID Subsystems

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Remote GUI Management via web browser

  • LCD panel with buttons and CLI also provided for configuration and monitoring

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • 300W x 2 Hot Swappable / Redundant Power Supply

  • Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

 


SOL i8-is

datasheet

 

  • 2 x CPU !! , Intel XScale 64-bit RISC
    - RAID : Intel XScale 321 400 Mhz 64-bit RISC CPU
    - iSCSI : 80321 600Mhz <-- High Performance

  • Standard 128MB cache RAM , Up to 1GB ECC supported
    - Secondary Cache 128MB dedicated for iSCSI and TOE processing

  • RAID 0, 1, 3, 5, 6, 10, JBOD

  • Hot Swap HDD, Auto-rebuilding, & Hot Spare

  • Fully modularized design for highest reliability and easy maintenance

  • Remote GUI Management via web browser

  • Host : Two different host channels working simultaneously
    - 1 x 1Gb iSCSI , 1Gb/s
    - 1 x Ultra160 SCSI,160MB/sec

  • iSCSI device Expansion - Daisy Chainable HDD, RAID, Tape Library, Jukebox of DVD/CD, ... then become iSCSI devices for SAN users

  • HDD : 8 x EIDE HDD interface

  • RAID disk Roaming between RAID subsystems

  • Background Initialization for fast use

  • Online RAID level Migration and Volume Expansion

  • Allow HDD capacity truncation after decimal point for RAID creation

  • S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

  • Smart LCD display with buttons to configure and monitoring

Specifications subject to change without notice.
Contact us for more information.

Copyright © 2007 Solkenix System Inc., all rights reserved                   Home