Type

Fibre Channel

iSCSI

SCSI

iSCSI + SCSI

USB / FireWire

FastStream-VT5300

datasheet

• Configurable for 1 or 2 Virtual Tape Libraries

• Up to 30 Virtual Tape drives and 256 Virtual Tapes per Library

• RAID Levels 0, 1, 5, 10

• Dual 4Gb Fibre Channel Host Interfaces

• Dual Ultra320 SCSI Device Interfaces

• One-click installation to simplify configuration and management

• Global Hot Spares allow faulted drives to automatically rebuild

• SpeedWrite Feature boosts write performance by efficiently managing writes between the server and virtual tape drives

• HDD is significantly more reliable, with no cleaning or streaming problems

• ExpressNAV™ browser-based management console for remote configuration, management, and diagnostic capabilities

• On-the-fly tape expansion allows the user to increase the amount of virtual tapes available without having to purchase additional virtual tape hardware

• OS independent enables easy integration into current infrastructure

• Phone home error notification

• RoHS Compliant

FastStream-SC5700

datasheet

• Add instant data protection - DVRAID and RAID Levels 0, 1, 5, 10

• Add SAN Functionality to existing SCSI Storage

• Dual 4Gb Fibre Channel Host Interfaces

• Dual 4Gb Fibre Channel Device Interfaces

• Drive Partitioning allows you to create smaller  partitions on large RAID drives.

• Global Hot Spares allow faulted drives to automatically rebuild

• Drive Initialization and Verification feature identifies drives with soft errors or performance issues

• Increase system performance to match application needs

• ExpressNAV™ integrated management console for remote configuration, management and
  diagnostic capabilities

• Storage pooling improves utilization of existing storage while reducing managerial and administrative overhead

• Add storage as needed with minimal or no downtime

• OS independent enables easy integration into current infrastructure

• Phone home error notification

• RoHS Compliant

FastStream-SC5300

datasheet

• Add instant data protection - DVRAID and RAID Levels 0, 1, 5, 10

• Add SAN Functionality to existing SCSI Storage

• Dual 4Gb Fibre Channel Host Interfaces

• Dual Ultra320 SCSI Device Interfaces

• Drive Partitioning allows you to create smaller  partitions on large RAID drives.

• Global Hot Spares allow faulted drives to automatically rebuild

• Drive Initialization and Verification feature identifies drives with soft errors or performance issues

• Increase system performance to match application needs

• ExpressNAV™ integrated management console for remote configuration, management and
  diagnostic capabilities

• Storage pooling improves utilization of existing storage while reducing managerial and administrative overhead

• Add storage as needed with minimal or no downtime

• OS independent enables easy integration into current infrastructure

• Phone home error notification

• Supports SCSI and Fibre Channel (future) storage devices

• (Future) support for SAS/SATA and Fibre Channel

• RoHS Compliant

FS-4500

datasheet

• RAID level 0, 1, 3, 5, 10, 30, 50, JBOD using Multiple XOR techniques

• Host independent, no driver required to the host bus

• Host interface: Dual Loop 2Gb Fibre Channel, bandwidth up to 400MB/sec

• 12 x SATA 3.0 Gb HDD bay, with dual port access and failover to each HDD

• Dual redundant power supply, hot swap capable

• 256MB ECC cache, up to 1GB to each controller

• Dynamic online RAID expansion, partitioning, and reconfiguration

• 10/100 Ethernet port, and RS232 port for monitoring and configuration

• up to 48,000 IOPS and 385MByte/sec (sustained reads)

• Dual Active redundant failover/failback RAID controller

• Battery protected mirrored write cache

• SAN ready, Full Fabric support

JMR Turbo

datasheet

• One to three controllers can be connected in a cluster

• Eight Fibre Channel ports per controller, which are configurable for either disk or host connectivity

• Each controller supports up to 840 drives

• RAID system can be tuned for access-intensive or capacity-intensive environment (or in between)

• Multi-processor, multi-bus technology

• RAID Levels 0, 1, 10, 100, 3, 30, 5, 50

• Active-Active-Active configurations  triple performance

SOL SS16-F2

datasheet

• Intel 80321 600 Mhz 64-bit RISC CPU with PCI-X Internal Bus and XOR Engine

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 0+1, 30, 50, NRAID

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Embedded environmental sensors for intelligent temperature/Voltage/FAN status self-diagnostics and analysis

• Host : 2 x 2Gb Fibre Channel，200MB/sec per channel

• HDD : 16 x Ultra320 SCSI (320MB/s)  HDD bay, daisy chainable for another two 16-bay JBOD for Capacity Expansion

• RAID disk Roaming between RAID subsystems

• Dynamic Volume Expansion, Array Roaming, HD Traveling supported

• Online Multiple RAID group Expansion

• Online Multiple Manual or Event-triggered disk cloning

• Online Multiple Manual or periodic disk scrubbing

• Smart LCD display with buttons to configure and monitoring

• 300W x 3 Hot Swappable / Redundant Power Supply

SOL SA16i-F4

datasheet

• Intel XScale 321 400 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Fully modularized design for highest reliability and easy maintenance

• Remote GUI Management via web browser

• Host : 2 x 4Gb Fibre Channel，400MB/sec per channel

• HDD : 16 x SATA II (3Gbs)  HDD interface

• RAID disk Roaming between RAID subsystems

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

• Smart LCD display with buttons to configure and monitoring

SOL SA12i-F4

datasheet

• Intel XScale 321 400 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Fully modularized design for highest reliability and easy maintenance

• Remote GUI Management via web browser

• Host : 2 x 4Gb Fibre Channel，400MB/sec per channel

• HDD : 12 x SATA II (3Gbs)  HDD interface

• RAID disk Roaming between RAID subsystems

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

• Smart LCD display with buttons to configure and monitoring

SOL SAS12-F4

datasheet

• 64-bit RISC CPU (to be released)

• Standard 128MB ECC cache for each controller, Up to 2 x 2GB with resizing

• Hot Swappable / Redundant Dual Controllers or Single Controller

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Active-Active Logical Unit Access and Software Cache Mirroring

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Fully modularized design for highest reliability and easy maintenance

• Remote GUI Management via web browser

• Host : Up to 4 x 4Gb Fibre Channel，32 Concurrent Hosts Supported

• HDD : 12 x Dual Port SAS (3Gbs) or SATA II (3Gbs)  HDD interface

• Support Online Daisy Chaining JBOD, Storage Group and Volume Expansion

• Up to 256 LUNs is Supported

• Web Based Management Interface, SNMP, Email Alert are supported

• SMI-S compliant and Supports VSS and VDS features

• Snapshot in the box
         

SOL iSA16

datasheet

• Intel XScale 331 500 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 2GB ECC supported

• RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

• Host : 2 x 1Gb Ethernet/iSCSI, 1Gb/sec per Channel

• HDD : 16 x SATA II (3Gbs)  HDD Interface

• RAID Disk Roaming between RAID Subsystems

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Remote GUI Management via web browser

• LCD panel with buttons and CLI also provided for configuration and monitoring

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• 250W x 3 Hot Swappable / Redundant Power Supply

• Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

SOL SS16

datasheet

• Intel 80321 600 Mhz 64-bit RISC CPU with PCI-X Internal Bus and XOR Engine

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 0+1, 30, 50, NRAID

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Embedded environmental sensors for intelligent temperature/Voltage/FAN status self-diagnostics and analysis

• Host : 2 x Ultra320 SCSI，320MB/sec per channel

• HDD : 16 x Ultra320 SCSI (320MB/s)  HDD bay, daisy chainable for another two 16-bay JBOD for Capacity Expansion

• RAID disk Roaming between RAID subsystems

• Dynamic Volume Expansion, Array Roaming, HD Traveling supported

• Online Multiple RAID group Expansion

• Online Multiple Manual or Event-triggered disk cloning

• Online Multiple Manual or periodic disk scrubbing

• Smart LCD display with buttons to configure and monitoring

• 300W x 3 Hot Swappable / Redundant Power Supply

SS12

datasheet

• Intel 80321 600 Mhz 64-bit RISC CPU with PCI-X Internal Bus and XOR Engine

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 0+1, 30, 50, NRAID

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Embedded environmental sensors for intelligent temperature/Voltage/FAN status self-diagnostics and analysis

• Host : 2 x Ultra320 SCSI，320MB/sec per channel

• HDD : 12 x Ultra320 SCSI (320MB/s)  HDD bay, daisy chainable for another two 12-bay JBOD for Capacity Expansion

• RAID disk Roaming between RAID subsystems

• Dynamic Volume Expansion, Array Roaming, HD Traveling supported

• Online Multiple RAID group Expansion

• Online Multiple Manual or Event-triggered disk cloning

• Online Multiple Manual or periodic disk scrubbing

• Smart LCD display with buttons to configure and monitoring

• 300W x 2 Hot Swappable / Redundant Power Supply

SOL SA16

datasheet

• Intel XScale 331 500 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 2GB ECC supported

• RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

• Host : 2 x Ultra320 SCSI, 320MB/sec per Channel

• HDD : 16 x SATA II (3Gbs)  HDD Interface

• RAID Disk Roaming between RAID Subsystems

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Remote GUI Management via web browser

• LCD panel with buttons and CLI also provided for configuration and monitoring

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• 250W x 3 Hot Swappable / Redundant Power Supply

• Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

SOL SA16i

datasheet

• Intel XScale 321 400 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Fully modularized design for highest reliability and easy maintenance

• Remote GUI Management via web browser

• Host : 2 x U320 SCSI，320MB/sec per channel

• HDD : 16 x SATA II (3Gbs)  HDD interface

• RAID disk Roaming between RAID subsystems

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

• Smart LCD display with buttons to configure and monitoring

SOL SA12i

datasheet

• Intel XScale 321 400 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Fully modularized design for highest reliability and easy maintenance

• Remote GUI Management via web browser

• Host : 2 x Ultra320 SCSI，320MB/sec per channel

• HDD : 12 x SATA II (3Gbs)  HDD interface

• RAID disk Roaming between RAID subsystems

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

• Smart LCD display with buttons to configure and monitoring

SOL SA8

datasheet

• Intel XScale 331 500 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 2GB ECC supported

• RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

• Host : 2 x Ultra320 SCSI, 320MB/sec per Channel

• HDD : 8 x SATA II (3Gbs)  HDD Interface

• RAID Disk Roaming between RAID Subsystems

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Remote GUI Management via web browser

• LCD panel with buttons and CLI also provided for configuration and monitoring

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• 300W x 2 Hot Swappable / Redundant Power Supply

• Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

SOL i8

datasheet

• Intel XScale 321 400 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM , Up to 1GB ECC supported

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Fully modularized design for highest reliability and easy maintenance

• Remote GUI Management via web browser

• Host : 2 x Ultra160 SCSI，160MB/sec per channel

• HDD : 8 x EIDE HDD interface

• RAID disk Roaming between RAID subsystems

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

• Smart LCD display with buttons to configure and monitoring

SOL SA5   (U320 SCSI)

SOL SA5-FW (Combo)

datasheet

• Intel 80219 400 Mhz 64-bit RISC CPU

• Standard 128MB cache RAM

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Host : 1 x Ultra320 SCSI，320MB/sec per channel (SA5-U320)
  Host : 1 x USB 2.0 + 1 x 1394b FireWire (SA5-FW)

• HDD : 5 x SATA II (3Gb/s) HDD interface

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Smart LCD display with buttons to configure and monitoring

• Web Browser Management Utility Embedded

SOL SA16-is

datasheet

• 2 x CPU !! , Intel 64-bit RISC CPU
  - RAID : Intel XScale 331 500 Mhz
  - iSCSI 550 : 80321 600Mhz <- High Performance

• Standard 128MB cache RAM , Up to 2GB ECC supported
  - Secondary Cache 128MB dedicated for iSCSI and TOE processing

• RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

• Host : Two different host channels working simultaneously
  - 1 x 1Gb iSCSI , 1Gb/s
  - 1 x Ultra320 SCSI，320MB/sec

• iSCSI device Expansion - Daisy Chainable HDD, RAID, Tape Library, Jukebox of DVD/CD, ... then become iSCSI devices for SAN users

• HDD : 16 x SATA II (3Gbs)  HDD Interface

• RAID Disk Roaming between RAID Subsystems

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Remote GUI Management via web browser

• LCD panel with buttons and CLI also provided for configuration and monitoring

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• 250W x 3 Hot Swappable / Redundant Power Supply

• Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

SOL SA8-is

datasheet

• 2 x CPU !! , Intel 64-bit RISC CPU
  - RAID : Intel XScale 331 500 Mhz
  - iSCSI 550 : 80321 600Mhz <- High Performance

• Standard 128MB cache RAM , Up to 2GB ECC supported
  - Secondary Cache 128MB dedicated for iSCSI and TOE processing

• RAID 0, 1, 3, 5, 6, 0+1, 30, 50, 60, JBOD

• Host : Two different host channels working simultaneously
  - 1 x 1Gb iSCSI , 1Gb/s
  - 1 x Ultra320 SCSI，320MB/sec

• iSCSI device Expansion - Daisy Chainable HDD, RAID, Tape Library, Jukebox of DVD/CD, ... then become iSCSI devices for SAN users

• HDD : 8 x SATA II (3Gbs)  HDD Interface

• RAID Disk Roaming between RAID Subsystems

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Remote GUI Management via web browser

• LCD panel with buttons and CLI also provided for configuration and monitoring

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• 300W x 2 Hot Swappable / Redundant Power Supply

• Upgradeable to iSCSI + SCSI Host channel to iSCSI SAN and Direct Attached

SOL i8-is

datasheet

• 2 x CPU !! , Intel XScale 64-bit RISC
  - RAID : Intel XScale 321 400 Mhz 64-bit RISC CPU
  - iSCSI : 80321 600Mhz <-- High Performance

• Standard 128MB cache RAM , Up to 1GB ECC supported
  - Secondary Cache 128MB dedicated for iSCSI and TOE processing

• RAID 0, 1, 3, 5, 6, 10, JBOD

• Hot Swap HDD, Auto-rebuilding, & Hot Spare

• Fully modularized design for highest reliability and easy maintenance

• Remote GUI Management via web browser

• Host : Two different host channels working simultaneously
  - 1 x 1Gb iSCSI , 1Gb/s
  - 1 x Ultra160 SCSI，160MB/sec

• iSCSI device Expansion - Daisy Chainable HDD, RAID, Tape Library, Jukebox of DVD/CD, ... then become iSCSI devices for SAN users

• HDD : 8 x EIDE HDD interface

• RAID disk Roaming between RAID subsystems

• Background Initialization for fast use

• Online RAID level Migration and Volume Expansion

• Allow HDD capacity truncation after decimal point for RAID creation

• S.M.A.R.T. features embedded with all disk from any manufactures for bad section and disk error handling

• Smart LCD display with buttons to configure and monitoring